Daewoo Nexia
+ The maintenance instruction
+ Maintenance service
+ The engine
+ 3. The engine (two top camshafts)
+ Cooling system
+ Fuel and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. The electronic block of management and gauges
+ Transmission
+ 10. A five-speed transmission and the main transfer RPO MM5
+ 11. Automatic Transmission
+ Steering
- Running gear
13.2. Replacement of wheels
13.3. Wheel bolts
13.4. Обкатка tyres
13.5. Storage of tyres
13.6. Balancing of wheels
13.7. Chains противоскольжения
13.8. Pressure check in tyres
13.9. Check of a profile of tyres
13.10. Gate check
13.11. Corners of installation of wheels of the car
13.12. Preliminary check of a technical condition
13.13. Adjustment of a convergence of forward wheels
13.14. Check of a convergence of back wheels
13.15. Check of a corner of disorder of back wheels
13.16. Designations of wheel disks and tyres
+ 14. A forward suspension bracket
+ 15. A drive of forward wheels
+ 16. A back suspension bracket
+ Brake system
+ Body
+ Heating, ventilation
+ Electric equipment
|
The sizes of tyres and pressure of air
|
The tyre
|
Forward wheels
|
Back wheels
|
|
Pressure of air at loading to three persons, kgs/sm2
|
| 155 SR 13 |
1,8
|
1,6
|
| 175/70 R 13 |
1,8
|
1,6
|
| 185/60R 14Н |
2,1
|
1,9
|
|
Pressure of air at full loading, kgs/sm2
|
| 155 SR 13 |
1,9
|
2,4
|
| 175/70 R 13 |
1,9 |
2,1
|
| 185/60R 14Н |
2,2
|
2,4
|
Rating values of parametres of the unit of wheels
|
Parametres
|
Forward wheels
|
Back wheels
|
Disorder corner
|
-25'yo45'
|
–1 ° - 0 °
|
Corner of a longitudinal inclination of an axis шкворня
|
1°45'±1 °
|
|
| Convergence |
0°±10 ' (0,0±1,0 mm)
|
–10 ' – 40 ' (–1,0 – 4,0 mm)
|
|
Parametres
|
Forward wheels
|
Back wheels
|
| Disorder corner |
1,0 ° max
|
30 ' max
|
| Corner of a longitudinal inclination of an axis шкворня |
1,0 ° max
|
|
| Convergence |
|
15 ' max
|
The moments of an inhaling of wheel bolts
| Steel wheels |
90 Nanometers
|
| Aluminium wheels |
90 Nanometers
|
|
|