Daewoo Nexia

Since 1994 of release

Repair and car operation



Daewoo Nexia
+ The maintenance instruction
+ Maintenance service
+ The engine
+ 3. The engine (two top camshafts)
+ Cooling system
+ Fuel and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. The electronic block of management and gauges
+ Transmission
+ 10. A five-speed transmission and the main transfer RPO MM5
+ 11. Automatic Transmission
+ Steering
- Running gear
   13.2. Replacement of wheels
   13.3. Wheel bolts
   13.4. Обкатка tyres
   13.5. Storage of tyres
   13.6. Balancing of wheels
   13.7. Chains противоскольжения
   13.8. Pressure check in tyres
   13.9. Check of a profile of tyres
   13.10. Gate check
   13.11. Corners of installation of wheels of the car
   13.12. Preliminary check of a technical condition
   13.13. Adjustment of a convergence of forward wheels
   13.14. Check of a convergence of back wheels
   13.15. Check of a corner of disorder of back wheels
   13.16. Designations of wheel disks and tyres
+ 14. A forward suspension bracket
+ 15. A drive of forward wheels
+ 16. A back suspension bracket
+ Brake system
+ Body
+ Heating, ventilation
+ Electric equipment




13.9. Check of a profile of tyres
THE GENERAL DATA

Intensive deterioration of tyres is promoted by a sports manner of driving, intensive accelerations and sharp braking.
The prevention

Tyres can be maintained before achievement of depth of a profile of 1,6 mm, that is profile flutes should have depth on all surface of the tyre not less than 1,6 mm. However with a view of safety it is recommended to make change of tyres at depth of a profile of 3 mm.

Tyres M+S on snow have sufficient coupling with road at depth of a profile not less than 4 mm.

It is necessary to survey the tyre on presence of cuts and to establish their depth. If cuts reach a cord, the steel cord will be коррозировать from a getting moisture.