Daewoo Nexia

Since 1994 of release

Repair and car operation

Daewoo Nexia
+ The maintenance instruction
+ Maintenance service
+ The engine
+ 3. The engine (two top camshafts)
+ Cooling system
+ Fuel and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. The electronic block of management and gauges
+ Transmission
+ 10. A five-speed transmission and the main transfer RPO MM5
+ 11. Automatic Transmission
+ Steering
- Running gear
   13.2. Replacement of wheels
   13.3. Wheel bolts
   13.4. Обкатка tyres
   13.5. Storage of tyres
   13.6. Balancing of wheels
   13.7. Chains противоскольжения
   13.8. Pressure check in tyres
   13.9. Check of a profile of tyres
   13.10. Gate check
   13.11. Corners of installation of wheels of the car
   13.12. Preliminary check of a technical condition
   13.13. Adjustment of a convergence of forward wheels
   13.14. Check of a convergence of back wheels
   13.15. Check of a corner of disorder of back wheels
   13.16. Designations of wheel disks and tyres
+ 14. A forward suspension bracket
+ 15. A drive of forward wheels
+ 16. A back suspension bracket
+ Brake system
+ Body
+ Heating, ventilation
+ Electric equipment

13.12. Preliminary check of a technical condition

THE GENERAL DATA

The vibrations felt on a steering wheel, not always are a consequence of infringement of corners of installation of wheels. The possible reason is also the unbalance of wheels. Additional check is the test for stability of rectilinear movement of the car. The tendency to a cross-section deviation of the car at movement after equal horizontal road and the released steering wheel can be a consequence of non-uniform deterioration or damage of tyres. Before the control of corners of installation of wheels it is necessary to execute following preparatory operations.

To check up

PERFORMANCE ORDER

1. Size of pressure of air and degree of deterioration of a protector from all tyres.

2. Backlashes in подшипниковых knots of naves of wheels.

3. Backlashes about spherical hinges of a steering drive. At deterioration of hinges it is necessary to make replacement of details before check and adjustment of corners of installation of wheels.

4. Size of palpation of a wheel.

5. Sizes of static courses of suspension brackets of wheels and angular position of the Body. If necessary to spend updating before adjustment of a convergence of wheels.

6. Reliability of fastening реечного the steering mechanism to a car Body.

7. Working capacity of spring racks of a suspension bracket of forward wheels.

8. Reliability of fastening of the bottom levers of a forward suspension bracket.

9. Presence of constant loading of the car. If the car constantly эксплуати руется with this loading, it has to be present and at check of corners of installation of wheels.

10. The car should be established on an equal, horizontal platform without longitudinal and cross-section biases.

For correct installation of forward and back wheels it is necessary to satisfy following conditions.

1) All tyres should have an identical condition and similar drawing of a protector. Tyres should be completely serviceable.
2) Pressure of air in all wheels should be identical.

3) it is necessary to check up a condition закраин all wheels. Ободы should be serviceable.

4) On both forward seats cargoes in weight on 70 kg should be placed.

5) the Fuel tank should be filled on half.

6) to Shake some times the car that suspension brackets of wheels have come to static position.