Daewoo Nexia

Since 1994 of release

Repair and car operation

Daewoo Nexia
+ The maintenance instruction
+ Maintenance service
+ The engine
+ 3. The engine (two top camshafts)
+ Cooling system
+ Fuel and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. The electronic block of management and gauges
+ Transmission
+ 10. A five-speed transmission and the main transfer RPO MM5
+ 11. Automatic Transmission
- Steering
   12.2. The general description
   12.3. The reechnyj steering mechanism in gathering
   12.4. Tips of steering draughts
   12.5. Steering draughts
   12.6. A casing crankcase the steering mechanism
   12.7. Муфта a steering shaft
   12.8. A sealing cover of an aperture of a forward board of the Body
   12.9. Плунжер рейки
   12.10. The Shaft-gear wheel
   12.11. Рейка
   12.12. The needle bearing
   12.13. The directing plug рейки
   12.14. Check of neutral position рейки
   12.15. Recommendations about replacement of consolidations in the hydraulic booster
   12.16. Check of level and having added a working liquid
   12.17. Removal of air from hydrosystem
   12.18. The steering mechanism with the hydraulic booster in gathering
   12.19. Hoses and pipelines
   12.20. A tank
   12.21. Tips of steering draughts
   12.22. Steering draughts
   12.23. Plugs of hinges of steering draughts
   12.24. Муфта a steering shaft
   12.25. A sealing cover
   12.26. Hydrocylinder pipelines
   12.27. Adjustment of a preliminary tightness of a spring плунжера
   12.28. Consolidations of a shaft of the hydrodistributor and the top bearing
   12.29. The steering mechanism
   12.30. Check of neutral position рейки
   12.31. A belt of a drive of the pump
   12.32. A pulley of a drive of the pump
   12.33. The pump in gathering
   12.34. Control levers on a steering column
   12.35. A steering wheel
   12.36. The ignition lock
   12.37. A steering column
   12.38. Lever the switch, a steering shaft, a steering column (noncontrollable)
   12.39. Lever the switch, a steering shaft, a steering column (regulated)
+ Running gear
+ 14. A forward suspension bracket
+ 15. A drive of forward wheels
+ 16. A back suspension bracket
+ Brake system
+ Body
+ Heating, ventilation
+ Electric equipment

12.5. Steering draughts To remove or disconnect

Dismantle of steering draught

(ONLY FOR CARS WITH AUTOMATIC TRANSMISSION)
AND. POSITION OF CUTS ON THE FIXING PLATE AT INSTALLATION
CENTURY THE WRENCH
WITH. FOR SIMPLIFICATION OF INSTALLATION TO APPLY A THIN FILM КОНСИСТЕНТНОЙ GREASINGS ON THE PLUG

(ONLY FOR CARS WITH THE MANUAL TRANSMISSION)
23. STEERING DRAUGHT (LEFT)
21. THE FIXING PLATE
25. THE BOLT
26. THE BASIC PLATE (ONLY FOR CARS WITH THE MANUAL TRANSMISSION)
27. THE PLUG OF THE HINGE OF STEERING DRAUGHT
30. THE WASHER
32. CARTER'S CASING
33. ДЕМПФЕР THE STEERING (ONLY FOR CARS WITH AUTOMATIC TRANSMISSION)

PERFORMANCE ORDER

1. Fixing plate 24.

2. A coupling bolt 22.

3. A bolt of 25 fastenings of the internal hinge of steering draught.
The prevention
At simultaneous dismantle of both steering draughts it is necessary after removal of the first draught, to screw into place a bolt 25 to keep mutual position рейки, a casing and a directing lath.

4. To deduce a head of steering draught from under a basic plate and to remove draught.

To establish or attach

PERFORMANCE ORDER

1. To check up, that washers 30 have been inserted into a casing 32.

2. Steering draught.

3. To screw a bolt 25. Bolts of fastening of steering bent for рейке рулевoгo the mechanism the moment of 90 Nanometers.

4. To screw a coupling bolt 22. To tighten a bolt клеммового connections of steering draught by the moment of 22 Nanometers.

5. A new fixing plate.