Daewoo Nexia

Since 1994 of release

Repair and car operation


Daewoo Nexia
+ The maintenance instruction
+ Maintenance service
+ The engine
+ 3. The engine (two top camshafts)
+ Cooling system
+ Fuel and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. The electronic block of management and gauges
+ Transmission
+ 10. A five-speed transmission and the main transfer RPO MM5
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. A forward suspension bracket
- 15. A drive of forward wheels
   15.2. The general description
   15.3. Kardannye shaft in gathering
   15.4. An external reflective ring
   15.5. A cover of the external hinge
   15.6. The external hinge
   15.7. A cover of the internal hinge of type "Tripod"
   15.8. A cover of the hinge of type "Lebro" with cross flutes
   15.9. Consolidation propeller a shaft in crankcase transmissions
+ 16. A back suspension bracket
+ Brake system
+ Body
+ Heating, ventilation
+ Electric equipment




15.6. The external hinge To disassemble

Dismantle of balls the SHRUS

AND. THE HAMMER
CENTURY BRASS SMALL BEARDS

2. THE CASE EXTERNAL THE SHRUS
3. THE SEPARATOR
4. THE FIST
5. BALLS

Separator and fist dismantle

AND. THE CROSSPIECE
CENTURY OF THE WINDOW

2. THE CASE THE SHRUS
3. THE SEPARATOR

Separator and fist dismantling

AND. THE CROSSPIECE OF FLUTES OF THE FIST
CENTURY OF THE WINDOW OF THE SEPARATOR

3. THE SEPARATOR
4. THE FIST

PERFORMANCE ORDER
1. To remove a protective cover.
2. Easy blows of a hammer on brass a small beard to develop a separator 3 in the hinge so that it was possible to take out one of balls 5.
3. To turn a separator in an opposite direction and to take out opposite to the first the sphere.
4. To repeat similar operations for dismantle of all six balls.
5. To turn a separator 3 and a fist 4 on 90 ° concerning a longitudinal axis of the case 2 hinges. To arrange windows in a separator and crosspieces of flutes of a fist the friend opposite to the friend.
6. To take out a separator 3 and a fist 4 of the case 2.
7. To develop a fist 4 on 90 ° concerning a longitudinal axis of a separator, keeping an arrangement of windows in a separator and crosspieces of a fist the friend opposite to the friend.
8. To get a crosspiece of a fist 4 in a window of a separator 3 and to take out a fist from a separator.

To collect
The prevention

Before assemblage to be convinced that the fist is turned to a shaft by an end face with an internal assembly flute for a spring ring.

PERFORMANCE ORDER
1. To grease with recommended greasing ball flutes in cases 2 and on a fist 4 hinges.
2. To establish a fist 4 in a separator 3, having placed a fist crosspiece in a separator window.
3. To develop a fist 4 on 90 ° concerning a longitudinal axis of a separator, keeping an arrangement of windows in a separator and crosspieces of a fist the friend opposite to the friend.
4. To insert a separator 3 and a fist 4 into the case 2.
5. To turn a separator 3 and a fist 4 on 90 ° concerning a longitudinal axis of the case 2 hinges. To arrange windows in a separator and crosspieces of flutes of a fist the friend opposite to the friend.
6. To establish the first ball.
7. To turn a separator in an opposite direction and to establish a ball in an opposite flute.
8. To repeat similar operations for installation of all six balls.
9. To establish a cover 8 on a shaft 10.
10. To establish the hinge in gathering on a shaft 10.
11. To fix a cover 8 on the case 2 hinges.
12. To fix new collars 7 and 9 on mouths of a cover 8.