Successful elimination leakage Bodies depends on correct carrying out of diagnostics for the purpose of localisation of malfunctions of the Body and is reached by adjustment of mutual position of elements of the Body and its equipment, and also application of special repair hermetics. The first stage is definition of conditions at which about a car Body water gets. For example, water can proceed in the Body at parking on an inclined platform or get only to branch for placing of a spare wheel etc. After the zone leakage is approximately defined, the exact arrangement of a place of hit of water can be quickly established by means of a water or air stream from a hose. If it was not possible to find out not tight place, it is necessary to execute full test of the Body for tightness by means of the special equipment. At diagnostics and Body repair it can be demanded to dismantle some panels of an upholstery and a part of the equipment of the Body.
The prevention It is necessary to define precisely a place of hit of water in the Body before undertaking any measures on malfunction elimination. Otherwise the temporary effect will be gained only. The further diagnostics and repair can be considerably complicated.
Check of a suspicious place should be continued until all ways of hit of water to the Body will be found out.
Check of tightness of the Body by means of a hose with water
At carrying out of the given check in car salon there should be an assistant for the control over water hit in the Body. It is necessary to use a hose without a directing nozzle.
Check should be begun with the bottom part of a suspicious place and gradually to be displaced upwards. |