Daewoo Nexia

Since 1994 of release

Repair and car operation



Daewoo Nexia
+ The maintenance instruction
+ Maintenance service
+ The engine
+ 3. The engine (two top camshafts)
+ Cooling system
+ Fuel and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. The electronic block of management and gauges
+ Transmission
+ 10. A five-speed transmission and the main transfer RPO MM5
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. A forward suspension bracket
+ 15. A drive of forward wheels
+ 16. A back suspension bracket
+ Brake system
- Body
   18.2. Identification and use of keys
   18.3. Pasted lateral moldings
   18.4. Diagnostics and repair leakage Bodies
   18.5. Anticorrosive processing
   + 18.6. Dismantle of consolidations of wind and back glasses
   - 18.7. A windscreen
      18.7.2. Full replacement of a glutinous fringing of a window aperture
   + 18.8. Back glass (the Body a sedan)
   18.9. Glass of a back door (the Body a hatch-back)
   18.10. Triangular lateral glass
   + 18.11. Elimination leakage consolidations
   + 18.12. A rear-view mirror
   + 18.13. An electroheater of back glass
   + 18.14. Bumpers
   18.15. An external ventilating lattice
   18.16. The switch of a forward door
   18.17. A cowl
   18.18. Cowl loops
   18.19. A cowl emphasis
   18.20. The zapornoe device of a cowl
   18.21. A safety latch of a cowl
   18.22. A cable of a latch of a cowl
   18.23. A radiator lattice
   18.24. A forward wing
   + 18.25. Panels of an upholstery of doors
   + 18.26. The equipment of doors (forward and back doors)
   + 18.27. Door-locks
   + 18.28. Glasses of doors
   18.29. External rear-view mirrors
   18.30. Dismantle and installation of forward and back doors
   + 18.31. Back panels of an upholstery (the Body a hatch-back)
   + 18.32. Upholstery panels (the Body a sedan)
   18.33. The external panel
   18.34. ventilation the valve (the Body a hatch-back)
   18.35. hatch mouths of a fuel tank
   + 18.36. Opening window leaves (the Body a hatch-back)
   + 18.37. A back shelf (the Body a sedan)
   18.38. A luggage space cover (the Body a hatch-back)
   18.39. An overlay of a back wall of a luggage carrier (the Body a sedan)
   + 18.40. A luggage carrier cover (the Body a sedan)
   18.41. The back combined lantern
   + 18.42. A back door (the Body a hatch-back)
   18.43. A roof
   18.44. The ceiling panel
   18.45. Protivosolnechnye peaks
   18.46. A plafond of internal illumination
   + 18.47. Panels and the salon equipment
   18.48. External longitudinal overlays of a roof
   + 18.49. The ventilating hatch
   + 18.50. Forward seats
   + 18.51. A back seat
+ Heating, ventilation
+ Electric equipment




18.7. A windscreen

18.7.1. Partial replacement of a glutinous fringing
THE GENERAL DATA

Rotary finger and windscreen emphasis

1. THE WINDSCREEN EMPHASIS
2. THE ROTARY FINGER

To remove or disconnect

Dismantle of a rotary finger

1. THE PLATEN OF THE LEVER OF THE SCREEN WIPER
2. THE WINDSCREEN
3. THE ROTARY FINGER
4. THE WINDSCREEN EMPHASIS

Windscreen dismantle

1. THE STRING

PERFORMANCE ORDER
1. Levers of a screen wiper and an external ventilating lattice.
1а. To remove plastic caps from platens of levers of a screen wiper.
1б. To turn away a nut and to remove levers of a screen wiper with шлицевых shafts of platens.
1в. To turn out three screws and to remove a ventilating lattice.
2. The bottom rotary fingers and a windscreen emphasis (on one from each party of the car).
3. An internal rear-view mirror.
4. A sealant and a cord from a forward rack.
5. Right and left decorative moldings a windscreen. By means of a knife for sealant removal to make an incision the parties and sealant top as it is possible more close to a glass edge. To insert outside a string between glass and the Body and by means of the second mechanic to cut off a glutinous layer on the bottom edge of glass.
6. A windscreen from the car.
7. The bottom decorative strip of a windscreen.

To clear

PERFORMANCE ORDER
1. An aperture of a window from the rests of all materials.
2. Glass on perimetre of an edge for the subsequent drawing of preparatory layers.
3. To wipe a windscreen the pure fabric moistened in spirit.

To establish or attach

Drawing on a windscreen of priming structure

1. THE NEW BRUSH
2. STRUCTURE FOR PRIMING COAT DRAWING

Drawing герметизирующего structure

Thickness of the platen of glutinous structure – 5 mm.

Windscreen installation

1. BACK GLASS
2. THE EMPHASIS OF BACK GLASS

PERFORMANCE ORDER
1. The bottom emphasis of a windscreen the flat party turned upwards. To establish a rotary finger.
2. By means of a new brush to put on edge has flown down preparatory layers, using corresponding structures from a repair set. At first it is necessary to put a priming coat from transparent structure, and then from structure of black colour. Priming coats put on perimetre of an edge of glass. Priming put on edge perimetre has flown down a strip the in width of 6 mm.
3. Top, lateral and bottom moldings on a windscreen edge.
4. On perimetre of an edge of a window aperture to put уретановый glutinous structure in the form of the platen in the thickness of 5 mm (fig. Drawing герметизирующего structure).
5. By means of the second mechanic to establish a windscreen on the car. Сцентриро вать glass in the Body aperture. Use of rubber suckers can facilitate windscreen installation (fig. windscreen Installation).
6. To turn a windscreen emphasis clockwise so that flat parts of an emphasis have appeared in the bottom position.
7. To check up tightness of consolidation of a windscreen, watering. At detection leakage it is necessary to dry glass and in addition to impose герметизирующий structure. If it was not possible to eliminate a leak, it is necessary to remove glass and to repeat all installation anew.
8. Levers of screen wipers and an external ventilating lattice.
8а. To establish into place a ventilating lattice and to fix its three screws.
8б. To establish levers of screen wipers on шлицевые platens.
8в. To screw nuts of fastening of levers.
9. An internal rear-view mirror.
10. A sealant and a cord on a forward pile.
11. Right and left decorative moldings a windscreen.