Daewoo Nexia

Since 1994 of release

Repair and car operation



Daewoo Nexia
+ The maintenance instruction
+ Maintenance service
+ The engine
+ 3. The engine (two top camshafts)
+ Cooling system
+ Fuel and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. The electronic block of management and gauges
+ Transmission
+ 10. A five-speed transmission and the main transfer RPO MM5
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. A forward suspension bracket
+ 15. A drive of forward wheels
+ 16. A back suspension bracket
+ Brake system
- Body
   18.2. Identification and use of keys
   18.3. Pasted lateral moldings
   18.4. Diagnostics and repair leakage Bodies
   18.5. Anticorrosive processing
   + 18.6. Dismantle of consolidations of wind and back glasses
   + 18.7. A windscreen
   + 18.8. Back glass (the Body a sedan)
   18.9. Glass of a back door (the Body a hatch-back)
   18.10. Triangular lateral glass
   + 18.11. Elimination leakage consolidations
   + 18.12. A rear-view mirror
   + 18.13. An electroheater of back glass
   + 18.14. Bumpers
   18.15. An external ventilating lattice
   18.16. The switch of a forward door
   18.17. A cowl
   18.18. Cowl loops
   18.19. A cowl emphasis
   18.20. The zapornoe device of a cowl
   18.21. A safety latch of a cowl
   18.22. A cable of a latch of a cowl
   18.23. A radiator lattice
   18.24. A forward wing
   + 18.25. Panels of an upholstery of doors
   + 18.26. The equipment of doors (forward and back doors)
   + 18.27. Door-locks
   + 18.28. Glasses of doors
   18.29. External rear-view mirrors
   18.30. Dismantle and installation of forward and back doors
   + 18.31. Back panels of an upholstery (the Body a hatch-back)
   + 18.32. Upholstery panels (the Body a sedan)
   18.33. The external panel
   18.34. ventilation the valve (the Body a hatch-back)
   18.35. hatch mouths of a fuel tank
   + 18.36. Opening window leaves (the Body a hatch-back)
   + 18.37. A back shelf (the Body a sedan)
   18.38. A luggage space cover (the Body a hatch-back)
   18.39. An overlay of a back wall of a luggage carrier (the Body a sedan)
   + 18.40. A luggage carrier cover (the Body a sedan)
   18.41. The back combined lantern
   + 18.42. A back door (the Body a hatch-back)
   18.43. A roof
   18.44. The ceiling panel
   18.45. Protivosolnechnye peaks
   18.46. A plafond of internal illumination
   + 18.47. Panels and the salon equipment
   18.48. External longitudinal overlays of a roof
   - 18.49. The ventilating hatch
      18.49.1. A sharnirnaja loop
      18.49.2. The glass panel
      18.49.3. A fringing
      18.49.4. A hatch lock
      18.49.5. A sealant
   + 18.50. Forward seats
   + 18.51. A back seat
+ Heating, ventilation
+ Electric equipment




18.49. The ventilating hatch
THE GENERAL DATA

The ventilating hatch

1. THE WASHER
2. SCREWS
3. THE OVERLAY
4. THE INTERMEDIATE PLATE
5. THE PAD
6. THE HOLDER
7. SCREWS
8. THE LOOP
9. THE LOOP COVER
10. THE HOLDER OF THE FRAMEWORK
11. THE HOLDER OF THE FRAMEWORK
12. THE RIVET
13. THE LOOP
14. THE INTERMEDIATE PLATE
15. THE INTERMEDIATE PLATE
16. THE LOOP LATCH
17. THE LOOP
18. THE RIVET
19. THE HANDLE
20. THE SPRING
21. THE PLUG
22. THE AXIS
23. THE AXIS
24. THE CLIP
25. THE AXIS
26. THE PLATE OF THE HOLDER
27. THE HOLDER OF THE BUTTON
20. THE SPRING
29. THE HOLDER
30. THE FRINGING
31. THE HOLDER OF THE NUT
32. THE SEALING LINING
33. THE FRAMEWORK
34. THE HOLDER OF THE FRAMEWORK
35. THE SEALANT
36. THE GLASS PANEL

The ventilating hatch opens by pressing the lock handle forward and is fixed in open position by pressing the handle upwards. One fixed position of the open hatch with the back edge raised on 40 mm is provided.

The hatch can be dismantled from the car. For this purpose it is necessary to open the hatch at first. Then to press on two pads of clamps and to raise slightly the hatch of, to disconnect forward шарнирные loops.

To establish the glass hatch into place, it is necessary to execute following operations. To put the hatch in vertical position by a forward edge on the sealant middle. To combine the loops fixed on glass, with corresponding grooves in a roof aperture. At loop jamming in a cut of an aperture of a roof, it is necessary to repeat installation anew. To insert a ledge of a latch to a nest for hatch fixing. To turn the lock handle downwards for full lock-out of the hatch.

Use of silicone greasing prolongs service life of consolidation and improves its tightness. It is necessary to grease a sealant once in six weeks.

Adjustment of position of glass for maintenance of reliable contact on a sealant contour is reached by means of addition or removal of linings запорного devices.