Daewoo Nexia

Since 1994 of release

Repair and car operation

Daewoo Nexia
+ The maintenance instruction
+ Maintenance service
+ The engine
+ 3. The engine (two top camshafts)
+ Cooling system
+ Fuel and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. The electronic block of management and gauges
+ Transmission
- 10. A five-speed transmission and the main transfer RPO MM5
   10.2. The general description
   10.3. Diagnostics of malfunctions
   10.4. The possible reasons of the raised noise of a transmission
   10.5. Level check transmission oils
   10.6. Adjustment of a drive of the mechanism of switching
   10.7. The gear change lever
   10.8. The floor mechanism of management of a transmission
   10.9. Draught of the mechanism of management
   10.10. The intermediate lever
   10.11. A speedometer drive
   10.12. A cover of the mechanism of the switch
   10.13. Consolidations of semiaxes
   10.14. Transmissions in gathering
   10.15. Dismantling of a transmission and the main transfer
   10.16. Characteristic malfunctions of a transmission and the possible reasons
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. A forward suspension bracket
+ 15. A drive of forward wheels
+ 16. A back suspension bracket
+ Brake system
+ Body
+ Heating, ventilation
+ Electric equipment

10.7. The gear change lever

THE GENERAL DATA

The hinge of the lever of switching

203. THE GEAR CHANGE LEVER
204. THE AXIS OF THE LEVER WITH THE SPRING CLAMP
205. КРЕСТОВИНА THE HINGE OF THE LEVER OF SWITCHING

Directing and assembly plugs

244. THE DIRECTING PLUG
245. THE ASSEMBLY PLUG

Carter and the platen of the mechanism of management of a transmission

209. CARTER OF THE MECHANISM OF MANAGEMENT OF THE TRANSMISSION
241. THE PLATEN

To remove or disconnect

Dismantle of an axis with a spring clamp

204. THE AXIS OF THE LEVER WITH THE SPRING CLAMP

Console dismantle

AND. TO PULL BACK
CENTURY SCREWS
WITH. THE BACK PART OF THE CONSOLE

PERFORMANCE ORDER

1. A negative wire of the battery.

2. An overlay And control panels.

3. To turn away three screws With.

4. To disconnect overlay D of the central console.

5. The handle 201 levers.

6. To lift and remove overlay D of the central console from the lever 203.

7. To translate the lever 203 in neutral position.

8. To turn a spring clamp 204 on an arrow, fig. Dismantle of an axis with a spring clamp see.

8а. To pull and remove an axis with a clamp 204 from the lever 203.

8б. To take out the lever of switching 203.

To establish or attach

Installation of the platen of the mechanism of management by a transmission

209. CARTER OF THE MECHANISM OF MANAGEMENT OF THE TRANSMISSION
210. THE BOLT
211. THE WASHER
240. THE COVER
241. THE PLATEN
244. THE DIRECTING PLUG
245. THE ASSEMBLY PLUG

Installation of plugs in crankcase the mechanism

209. CARTER OF THE MECHANISM OF MANAGEMENT OF THE TRANSMISSION
245. THE PLUG

PERFORMANCE ORDER

1. To establish the lever 203 in крестовину 205, to insert an axis with a clamp 204. To turn a clamp in initial position.

2. To put on the lever an overlay of the central console and to lower it into place.

3. To screw 2 screws With.

4. An overlay of the control panel And.

5. A negative wire of the battery.