Daewoo Nexia

Since 1994 of release

Repair and car operation



Daewoo Nexia
+ The maintenance instruction
+ Maintenance service
+ The engine
+ 3. The engine (two top camshafts)
+ Cooling system
+ Fuel and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. The electronic block of management and gauges
+ Transmission
- 10. A five-speed transmission and the main transfer RPO MM5
   10.2. The general description
   10.3. Diagnostics of malfunctions
   10.4. The possible reasons of the raised noise of a transmission
   10.5. Level check transmission oils
   10.6. Adjustment of a drive of the mechanism of switching
   10.7. The gear change lever
   10.8. The floor mechanism of management of a transmission
   10.9. Draught of the mechanism of management
   10.10. The intermediate lever
   10.11. A speedometer drive
   10.12. A cover of the mechanism of the switch
   10.13. Consolidations of semiaxes
   10.14. Transmissions in gathering
   10.15. Dismantling of a transmission and the main transfer
   10.16. Characteristic malfunctions of a transmission and the possible reasons
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. A forward suspension bracket
+ 15. A drive of forward wheels
+ 16. A back suspension bracket
+ Brake system
+ Body
+ Heating, ventilation
+ Electric equipment




10.9. Draught of the mechanism of management
THE GENERAL DATA

Drive of the mechanism of switching

210. THE BOLT
211. THE WASHER
212. Clamp THE CLIP
213. THE ADJUSTING TIP WITH THE EYE
214. DRAUGHT
220. THE PLUG
223. THE AXIS CLAMP
224. THE PLATEN WITH THE PLUG
237. THE HINGE AXIS
238. THE INTERMEDIATE PLATEN WITH THE LEVER
239. THE LEVER AXIS
241. THE PLATEN

To remove or disconnect

PERFORMANCE ORDER
1. A negative wire of the battery.
2. To remove plastic clips from both spherical tips of draught.
3. By means of a screw-driver to disconnect draught 214 from spherical fingers of a tip 213 and the lever of the platen 238.
4. To remove draught 214.

To establish or attach

PERFORMANCE ORDER
1. Draught 214 to a tip 213 and to the lever of the platen 230.
1а. Напрессовать draught eyes on spherical fingers.
2. To establish plastic clips in both spherical hinges of draught.
3. A negative wire of the battery.