Daewoo Nexia

Since 1994 of release

Repair and car operation



Daewoo Nexia
+ The maintenance instruction
+ Maintenance service
+ The engine
+ 3. The engine (two top camshafts)
+ Cooling system
+ Fuel and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. The electronic block of management and gauges
+ Transmission
+ 10. A five-speed transmission and the main transfer RPO MM5
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. A forward suspension bracket
+ 15. A drive of forward wheels
- 16. A back suspension bracket
   16.2. The general description
   16.3. Maintenance service and repair
   16.4. Check of size of forces of a friction in a suspension bracket
   16.5. Bearings of wheels
   16.6. The shock-absorber
   16.7. The stabilizer
   16.8. Springs
   16.9. Plugs of hinges of a back suspension bracket
   16.10. A back suspension bracket in gathering
   16.11. A nave
+ Brake system
+ Body
+ Heating, ventilation
+ Electric equipment




16.7. The stabilizer To remove or disconnect

Stabilizer dismantle

25. THE STABILIZER (HEAD)

PERFORMANCE ORDER
1. To lift the car the lift and опереть the Body on racks of jacks.
2. One back wheel.
3. A nut 18, a washer 19 and a bolt 20 on one lever, then on other. After that to dismantle the stabilizer 25 with pillows 24. The stabilizer to take out towards the removed wheel.

To establish or attach

PERFORMANCE ORDER
1. The stabilizer 25 in a cross-section beam 26 back suspension brackets.
2. Bolts 20 through apertures in levers and heads of the stabilizer, a washer 19 and nuts 18. Then to tighten bolts the moment of 80 Nanometers.
3. To grease stabilizer pillows with a liquid washing-up liquid and to insert into a cross-beam 26.
4. ПЗаднее a wheel. To tighten bolts the moment of 90 Nanometers.
5. To lower the car.