| 1. To note the demanded distance on a vertical from the top edge of glass to a place where the arm, fig. the Marking of a windscreen for installation of an arm rear-view mirrors (beginning) will be established. To note arm position on lateral aspect of a windscreen with the help стеклографа or it is small. To put a circular line of the big diameter around песта arm installations, fig. the Marking of a windscreen for installation of an arm rear-view mirrors (termination). |
| 2. To clear an internal surface of a windscreen by means of a household cleaner and a paper towel or by means of a cleaner for glasses. To wipe glass a paper towel dry. After that to wash out glass from traces of cleaners by means of the paper towel moistened in spirit. |
3. To process a surface прилегания an arm (if it new) a skin with granularity 320 or 360. In case of use of the dismantled arm it is necessary to remove completely with поверхностй прилегания all traces of old glue.
After grinding to wash out a surface прилегания an arm the paper towel moistened in spirit, and to allow to it to dry out.
To prepare a surface has flown down also an arm to pasting, following instructions of firm-manufacturer of a repair set.
To place an arm on a windscreen according to a marking and strongly to press it on 30-60 with. Later 5 minutes to remove surpluses of glue by means of a towel moistened in spirit, or a cleaner for glasses. |
|