Daewoo Nexia

Since 1994 of release

Repair and car operation


Daewoo Nexia
+ The maintenance instruction
+ Maintenance service
+ The engine
+ 3. The engine (two top camshafts)
+ Cooling system
+ Fuel and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. The electronic block of management and gauges
+ Transmission
+ 10. A five-speed transmission and the main transfer RPO MM5
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. A forward suspension bracket
+ 15. A drive of forward wheels
+ 16. A back suspension bracket
+ Brake system
- Body
   18.2. Identification and use of keys
   18.3. Pasted lateral moldings
   18.4. Diagnostics and repair leakage Bodies
   18.5. Anticorrosive processing
   + 18.6. Dismantle of consolidations of wind and back glasses
   + 18.7. A windscreen
   + 18.8. Back glass (the Body a sedan)
   18.9. Glass of a back door (the Body a hatch-back)
   18.10. Triangular lateral glass
   + 18.11. Elimination leakage consolidations
   + 18.12. A rear-view mirror
   + 18.13. An electroheater of back glass
   + 18.14. Bumpers
   18.15. An external ventilating lattice
   18.16. The switch of a forward door
   18.17. A cowl
   18.18. Cowl loops
   18.19. A cowl emphasis
   18.20. The zapornoe device of a cowl
   18.21. A safety latch of a cowl
   18.22. A cable of a latch of a cowl
   18.23. A radiator lattice
   18.24. A forward wing
   + 18.25. Panels of an upholstery of doors
   + 18.26. The equipment of doors (forward and back doors)
   + 18.27. Door-locks
   + 18.28. Glasses of doors
   18.29. External rear-view mirrors
   18.30. Dismantle and installation of forward and back doors
   + 18.31. Back panels of an upholstery (the Body a hatch-back)
   + 18.32. Upholstery panels (the Body a sedan)
   18.33. The external panel
   18.34. ventilation the valve (the Body a hatch-back)
   18.35. hatch mouths of a fuel tank
   + 18.36. Opening window leaves (the Body a hatch-back)
   + 18.37. A back shelf (the Body a sedan)
   18.38. A luggage space cover (the Body a hatch-back)
   18.39. An overlay of a back wall of a luggage carrier (the Body a sedan)
   + 18.40. A luggage carrier cover (the Body a sedan)
   18.41. The back combined lantern
   - 18.42. A back door (the Body a hatch-back)
      18.42.1. Gas shock-absorbers
      + 18.42.2. The lock
      18.42.3. Door-lock assemblage
      18.42.4. Loops
      18.42.5. A sealant
      18.42.6. The central top stoplight
      18.42.7. A back spoiler
   18.43. A roof
   18.44. The ceiling panel
   18.45. Protivosolnechnye peaks
   18.46. A plafond of internal illumination
   + 18.47. Panels and the salon equipment
   18.48. External longitudinal overlays of a roof
   + 18.49. The ventilating hatch
   + 18.50. Forward seats
   + 18.51. A back seat
+ Heating, ventilation
+ Electric equipment




18.42.1. Gas shock-absorbers
THE GENERAL DATA

Gas shock-absorbers of a back door

1. THE GAS SHOCK-ABSORBER
2. THE EMPHASIS
3. THE CLIP
4. THE SPHERICAL FINGER OF THE HINGE ON THE BACK DOOR
5. The SPHERICAL FINGER of the HINGE ON the Body

Gas shock-absorbers are intended for simplification of lifting of a back door. Shock-absorbers are fixed on a back door and the Body by means of the spherical hinges consisting of spherical fingers and tips. For fixing of spherical fingers clips serve.

To remove or disconnect

PERFORMANCE ORDER
1. To establish an emphasis under a back open door.
2. Clips of spherical hinges and shock-absorbers from a back door.
3. Clips of spherical hinges and shock-absorbers from a car Body.

To establish or attach

PERFORMANCE ORDER
1. Gas shock-absorbers to a car Body to fix hinges clips.
2. Gas shock-absorbers to a back door to fix hinges clips.
3. To check up keeping of a back door by gas shock-absorbers in completely open position.
The prevention

At low temperature of air (more low–29 °) pressure of gas in the shock-absorber decreases. It leads to reduction of efforts by a shock-absorber rod at fixing of a back door in open position. Rise in temperature normalises work of gas shock-absorbers.