Daewoo Nexia

Since 1994 of release

Repair and car operation



Daewoo Nexia
+ The maintenance instruction
+ Maintenance service
+ The engine
- 3. The engine (two top camshafts)
   3.2. The general description
   3.3. Work of hydraulic jacks of backlashes
   3.4. Greasing system
   3.5. Maintenance service and repair
   3.6. Compression check
   3.7. Dismantle and engine installation in gathering
   3.8. A klinovoj belt
   3.9. Engine support
   3.10. An inlet collector and a lining
   3.11. A final collector and a lining
   3.12. A cover клапанного the mechanism and a lining
   3.13. A pulley of a cranked shaft
   3.14. A forward cover of a gear belt
   3.15. A gear belt
   3.16. Натяжитель a gear belt
   3.17. A camshaft cogwheel
   3.18. A cogwheel of a cranked shaft
   3.19. A back cover of a gear belt
   3.20. Forward consolidation of a cranked shaft
   3.21. A camshaft. Hydrojacks of backlashes of valves
   3.22. A head of the block of cylinders
   3.23. Repair of a head of the block of cylinders
   3.24. Klapannye springs. Consolidations of cores of valves
   3.25. Dismantle of valves
   3.26. Directing plugs of valves
   3.27. Expansion of apertures of plugs
   3.28. Valves
   3.29. Klapannye springs
   3.30. Saddles of valves
   3.31. The oil pallet
   3.32. A reception branch pipe with the oil filter
   3.33. The oil pump
   3.34. Repair of the oil pump
   3.35. Pistons and rods
   3.36. A flywheel. Back consolidation of a cranked shaft
   3.37. A cranked shaft
   3.38. Rods and radical bearings
   3.39. Replacement of loose leaves
   3.40. Piston fingers and rings
   3.41. The block of cylinders
   3.42. Installation of pistons
   3.43. Balancing of a disk with a gear wreath
   3.44. Repair of carving apertures
   3.45. Diagnostics of malfunctions
+ Cooling system
+ Fuel and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. The electronic block of management and gauges
+ Transmission
+ 10. A five-speed transmission and the main transfer RPO MM5
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. A forward suspension bracket
+ 15. A drive of forward wheels
+ 16. A back suspension bracket
+ Brake system
+ Body
+ Heating, ventilation
+ Electric equipment




3.11. A final collector and a lining
THE GENERAL DATA

Dismantle of a heat-shielding casing

 


Dismantle of a final collector with a lining

 


Sequence of an inhaling of nuts of a final collector

 


To remove or disconnect

PERFORMANCE ORDER
1. A negative wire of the storage battery.
2. A wire of the gauge of 42 concentration of oxygen.
3. A heat-shielding casing In, having unscrewed three bolts And.
4. Oil щуп 111.
5. To lift the car and to dismantle a dual exhaust pipe 44 with a lining 43.
6. A final collector 41 and a lining 40, having unscrewed 9 nuts 38. Interfaced planes of a head of cylinders and a final collector.

To establish or attach

PERFORMANCE ORDER
1. A final collector 41 with a new lining 40.
2. To screw eight nuts 38 with washers 37. To tighten nuts of fastening of a final collector the moment of 22 Nanometers in the sequence shown on fig. Sequence of an inhaling of nuts of a final collector.
3. To lift the car and to establish a dual exhaust pipe 44 with a lining 43 by means of three nuts 47. To tighten nuts of fastening of a dual exhaust pipe the moment of 25 Nanometers.
4. Oil щуп 111.
5. A heat-shielding casing In a final collector 41, having screwed up three bolts And.