Daewoo Nexia

Since 1994 of release

Repair and car operation


Daewoo Nexia
+ The maintenance instruction
+ Maintenance service
+ The engine
- 3. The engine (two top camshafts)
   3.2. The general description
   3.3. Work of hydraulic jacks of backlashes
   3.4. Greasing system
   3.5. Maintenance service and repair
   3.6. Compression check
   3.7. Dismantle and engine installation in gathering
   3.8. A klinovoj belt
   3.9. Engine support
   3.10. An inlet collector and a lining
   3.11. A final collector and a lining
   3.12. A cover клапанного the mechanism and a lining
   3.13. A pulley of a cranked shaft
   3.14. A forward cover of a gear belt
   3.15. A gear belt
   3.16. Натяжитель a gear belt
   3.17. A camshaft cogwheel
   3.18. A cogwheel of a cranked shaft
   3.19. A back cover of a gear belt
   3.20. Forward consolidation of a cranked shaft
   3.21. A camshaft. Hydrojacks of backlashes of valves
   3.22. A head of the block of cylinders
   3.23. Repair of a head of the block of cylinders
   3.24. Klapannye springs. Consolidations of cores of valves
   3.25. Dismantle of valves
   3.26. Directing plugs of valves
   3.27. Expansion of apertures of plugs
   3.28. Valves
   3.29. Klapannye springs
   3.30. Saddles of valves
   3.31. The oil pallet
   3.32. A reception branch pipe with the oil filter
   3.33. The oil pump
   3.34. Repair of the oil pump
   3.35. Pistons and rods
   3.36. A flywheel. Back consolidation of a cranked shaft
   3.37. A cranked shaft
   3.38. Rods and radical bearings
   3.39. Replacement of loose leaves
   3.40. Piston fingers and rings
   3.41. The block of cylinders
   3.42. Installation of pistons
   3.43. Balancing of a disk with a gear wreath
   3.44. Repair of carving apertures
   3.45. Diagnostics of malfunctions
+ Cooling system
+ Fuel and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. The electronic block of management and gauges
+ Transmission
+ 10. A five-speed transmission and the main transfer RPO MM5
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. A forward suspension bracket
+ 15. A drive of forward wheels
+ 16. A back suspension bracket
+ Brake system
+ Body
+ Heating, ventilation
+ Electric equipment




3.17. A camshaft cogwheel
THE GENERAL DATA

Dismantle of a cogwheel of a cam-shaft

 

To remove or disconnect

PERFORMANCE ORDER
1. A negative wire of the storage battery.
2. A ventilating hose from a cover клапанного the mechanism and electric plugs (fig. the Branch pipe of an air cleaner and electric sockets see).
3. An air cleaner.
4. Приводные клиновые belts of the generator and the conditioner compressor.
5. A pulley of the pump of the steering amplifier (fig. Dismantle of a pulley of the pump of the steering amplifier see).
6. A forward cover 73 gear belts.
7. A cover 7 клапанного the mechanism.
8. Keeping a wrench a cam-shaft 19 from rotation, to unscrew a bolt 65 and to remove a wheel 63.

To establish or attach

PERFORMANCE ORDER
1. Both cogwheels 63 on cam-shafts 19. To wrap bolts 65.
2. To tighten a bolt of fastening of a cogwheel the moment of 67 Nanometers.
3. A cover 7 клапанного the mechanism.
4. A forward cover 73 gear belts and a pulley of the pump of the steering amplifier.
5. Приводные клиновые belts of the generator and the conditioner compressor.
6. An air cleaner.
7. A ventilating hose to a cover клапанного the mechanism and electric plugs.
8. A negative wire of the storage battery.