Daewoo Nexia

Since 1994 of release

Repair and car operation


Daewoo Nexia
+ The maintenance instruction
+ Maintenance service
+ The engine
- 3. The engine (two top camshafts)
   3.2. The general description
   3.3. Work of hydraulic jacks of backlashes
   3.4. Greasing system
   3.5. Maintenance service and repair
   3.6. Compression check
   3.7. Dismantle and engine installation in gathering
   3.8. A klinovoj belt
   3.9. Engine support
   3.10. An inlet collector and a lining
   3.11. A final collector and a lining
   3.12. A cover клапанного the mechanism and a lining
   3.13. A pulley of a cranked shaft
   3.14. A forward cover of a gear belt
   3.15. A gear belt
   3.16. Натяжитель a gear belt
   3.17. A camshaft cogwheel
   3.18. A cogwheel of a cranked shaft
   3.19. A back cover of a gear belt
   3.20. Forward consolidation of a cranked shaft
   3.21. A camshaft. Hydrojacks of backlashes of valves
   3.22. A head of the block of cylinders
   3.23. Repair of a head of the block of cylinders
   3.24. Klapannye springs. Consolidations of cores of valves
   3.25. Dismantle of valves
   3.26. Directing plugs of valves
   3.27. Expansion of apertures of plugs
   3.28. Valves
   3.29. Klapannye springs
   3.30. Saddles of valves
   3.31. The oil pallet
   3.32. A reception branch pipe with the oil filter
   3.33. The oil pump
   3.34. Repair of the oil pump
   3.35. Pistons and rods
   3.36. A flywheel. Back consolidation of a cranked shaft
   3.37. A cranked shaft
   3.38. Rods and radical bearings
   3.39. Replacement of loose leaves
   3.40. Piston fingers and rings
   3.41. The block of cylinders
   3.42. Installation of pistons
   3.43. Balancing of a disk with a gear wreath
   3.44. Repair of carving apertures
   3.45. Diagnostics of malfunctions
+ Cooling system
+ Fuel and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. The electronic block of management and gauges
+ Transmission
+ 10. A five-speed transmission and the main transfer RPO MM5
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. A forward suspension bracket
+ 15. A drive of forward wheels
+ 16. A back suspension bracket
+ Brake system
+ Body
+ Heating, ventilation
+ Electric equipment




3.12. A cover клапанного the mechanism and a lining
THE GENERAL DATA

Ventilation hose crankcase

 

Cover клапанного the mechanism and a lining

 

Installation of a lining of a cover клапанного the mechanism and sealing rings

 

Cover installation клапанного the mechanism

 

To remove or disconnect

PERFORMANCE ORDER
1. Ventilating hoses With and In from branch pipes on a cover клапанного the mechanism, the case throttle заслонки and the pipeline воздухочистителя (fig. the Branch pipe of an air cleaner and electric sockets see).
2. A collar 179, a hose 180 ventilations crankcase from a cover 7.
3. To unscrew four bolts 8 and to uncover 1 spark plugs a cover клапанного the mechanism.
4. Tips of spark plugs, then, having unscrewed bolts 9, a cover 7 and a lining 15. Condensed surfaces of a cover клапанного the mechanism and a head of cylinders.

To establish or attach

PERFORMANCE ORDER
1. To check up correctness of installation of sealing rings And in apertures for spark plugs.
2. A lining on a cover клапанного the mechanism.
The prevention

To check up correctness of installation in a flute of a semicircular rubber lining of consolidation of the case of the distributor of ignition.

3. A cover 7 with a lining 15 on a head of cylinders to screw in bolts 9. To tighten cover bolts клапанного механиз ма the moment of 8 Nanometers.
4. Tips and high voltage wires on spark plugs (observing an operating procedure of cylinders).
5. A cover of 1 spark plugs to screw in bolts 8.
6. A hose 180 ventilations crankcase to a cover 7 to tighten a collar 179.
7. Ventilating hoses With and In to branch pipes on a cover клапанного the mechanism, the case throttle заслонки and the pipeline воздухочистителя (fig. the Branch pipe of an air cleaner and electric sockets see).