2. To take out заглушки control apertures in basic brake disks.
To check up
PERFORMANCE ORDER
Visually a thickness of overlays of back drum-type brake mechanisms through apertures in brake basic disks. To establish into place заглушки.
If condition check pads through control apertures is complicated, it is necessary to remove wheels and brake drums and to measure a thickness of overlays.
To measure
PERFORMANCE ORDER
The minimum thickness of brake overlays (not less than 0,5 mm over heads of rivets). The prevention
Worn out pads it is necessary to replace only in the complete set.
To establish or attach
PERFORMANCE ORDER
1. A brake drum and the lock screw (if they have been dismantled).