Daewoo Nexia

Since 1994 of release

Repair and car operation

17.22. Колодки and overlays To remove or disconnect

Dismantle of pins

AND. SMALL BEARDS CENTURY THE HAMMER 1. РАЗЖИМНЫЕ SPRINGS 4. THE INTERNAL PART OF THE CASE OF THE SUPPORT 10. PINS 24. THE EXTERNAL PART OF THE CASE OF THE SUPPORT

Before the beginning of works to lift and fix the car properly.

PERFORMANCE ORDER

1. Forward wheels. The prevention For replacement pads or servicings of a brake disk to dismantle brake bracket it is not required. 2. Pins 10 from apertures скобы with the help a small beard and a hammer. Pins take out hammer blows from the inside скобы. 3. Razzhimnye springs. The prevention Springs are in the compressed condition, can jump out. It is necessary to be cautious at dismantle of pins. 4. Колодки from скобы. 4а. To take out external pad. 4б. To wring out the piston and to take out internal pad.

To establish or attach

Installation of pins and разжимных springs

1. РАЗЖИМНЫЕ SPRINGS 10. PINS

PERFORMANCE ORDER

1. Brake pads in bracket. The gauge of deterioration of overlays should settle down from above on internal колодке. The prevention The complete set of spare parts includes three kinds pads: left internal, right internal and two identical external pads. At installation gauges of deterioration of overlays should settle down above internal pads. Errors at installation pads will lead to decrease in working capacity of brake system and reduction of safety of the car. 2. The top pin. It is mounted from lateral aspect скобы. 3. Razzhimnye springs. To get the long ends of springs under pins. 4. The bottom pin. It is mounted from lateral aspect скобы. It is necessary to be convinced that the long ends of springs are under pins. 5. Forward wheels. 6. To lower the car.