Daewoo Nexia

Since 1994 of release

Repair and car operation

Daewoo Nexia
+ The maintenance instruction
+ Maintenance service
+ The engine
+ 3. The engine (two top camshafts)
+ Cooling system
+ Fuel and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. The electronic block of management and gauges
+ Transmission
+ 10. A five-speed transmission and the main transfer RPO MM5
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. A forward suspension bracket
+ 15. A drive of forward wheels
+ 16. A back suspension bracket
- Brake system
   17.2. The general description
   17.3. Check of a technical condition of brake system
   17.4. Filling of a tank of the main brake cylinder
   17.5. Removal of air from brake system
   17.6. Washing of brake system
   17.7. Check of a regulator of brake forces
   17.8. Brake hoses (lobbies)
   17.9. Brake hoses (back)
   + 17.10. A lay brake
   17.11. Check of a condition of forward brake overlays
   17.12. Check of a condition of back brake overlays
   17.13. Brake disks
   17.14. Brake drums
   17.15. A brake pedal
   17.16. The main brake cylinder
   17.17. A tank
   17.18. Regulators of brake forces (proportional valves)
   17.19. The main brake cylinder in gathering
   17.20. Repair of the main brake cylinder
   17.21. The disk brake mechanism
   17.22. Колодки and overlays
   17.23. A protective cover of the piston
   17.24. A brake disk
   17.25. A support
   17.26. A guard
   17.27. Support repair
   17.28. The drum-type brake mechanism
   17.29. Adjustment of the brake mechanism
   17.30. Adjustment of a lay brake
   17.31. A basic brake disk
   17.32. The wheel cylinder
   17.33. Repair of the wheel cylinder
   17.34. The vacuum amplifier of brakes
   + 17.35. Antiblocking system of brakes
   17.36. Removal of air from a brake hydraulic drive
   17.37. Removal of air from a brake hydraulic drive manually
   17.38. The valve for removal of air from the block of modulators
   17.39. Electromagnetic valves of modulators
   17.40. The block of hydraulic modulators with electric motors
   17.41. The electronic block of management of braking
   17.42. The gauge of angular speed of a forward wheel
   17.43. Flexible conducting CRS of a forward wheel
   17.44. The gauge of angular speed of a back wheel
   + 17.45. Flexible conducting CRS of a back wheel
   17.46. A system electric safety lock
   17.47. Relay ABS
   17.48. Signalling devices
+ Body
+ Heating, ventilation
+ Electric equipment

17.31. A basic brake disk


102. THE NUT

To remove or disconnect

1. To lift and fix properly the car.
2. Details of the brake mechanism.
3. A nave of a back wheel.
4. The holder of a cable of a lay brake.
5. The brake pipeline from the wheel cylinder. To muffle an aperture of the pipeline for an exception of losses of a brake liquid and dirt hit.
6. The wheel cylinder from a basic brake disk.
7. A basic brake disk 4.

To establish or attach

The prevention

Before installation brake pads to impose a thin layer of plastic greasing on contact places pads with a basic disk. Completely to screw a nut 102 on a core 101 regulators. To collect a regulator 14 and to establish it between brake and колодками. To check up correctness of position of a regulator. The nut 102 should not be jammed on a core carving (fig. the Regulator see).

1. A cardboard lining on a new basic disk.
2. A basic disk 4 on the suspension bracket lever. To tighten bolts of fastening of a basic disk to a flange of the lever of a suspension bracket the moment of 28 Nanometers.
3. The wheel cylinder on a basic disk. To tighten a bolt of fastening of the wheel cylinder to a basic disk the moment of 9 Nanometers.
4. The brake pipeline to the wheel cylinder. To tighten fastening of the pipeline by the moment of 16 Nanometers.
5. A cable of a lay brake in the holder.
6. A nave of a back wheel.
7. Details of the brake mechanism.
8. To remove air from a brake hydrodrive.