Daewoo Nexia

Since 1994 of release

Repair and car operation



Daewoo Nexia
+ The maintenance instruction
+ Maintenance service
+ The engine
+ 3. The engine (two top camshafts)
+ Cooling system
+ Fuel and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. The electronic block of management and gauges
+ Transmission
+ 10. A five-speed transmission and the main transfer RPO MM5
+ 11. Automatic Transmission
+ Steering
+ Running gear
+ 14. A forward suspension bracket
+ 15. A drive of forward wheels
+ 16. A back suspension bracket
- Brake system
   17.2. The general description
   17.3. Check of a technical condition of brake system
   17.4. Filling of a tank of the main brake cylinder
   17.5. Removal of air from brake system
   17.6. Washing of brake system
   17.7. Check of a regulator of brake forces
   17.8. Brake hoses (lobbies)
   17.9. Brake hoses (back)
   + 17.10. A lay brake
   17.11. Check of a condition of forward brake overlays
   17.12. Check of a condition of back brake overlays
   17.13. Brake disks
   17.14. Brake drums
   17.15. A brake pedal
   17.16. The main brake cylinder
   17.17. A tank
   17.18. Regulators of brake forces (proportional valves)
   17.19. The main brake cylinder in gathering
   17.20. Repair of the main brake cylinder
   17.21. The disk brake mechanism
   17.22. Колодки and overlays
   17.23. A protective cover of the piston
   17.24. A brake disk
   17.25. A support
   17.26. A guard
   17.27. Support repair
   17.28. The drum-type brake mechanism
   17.29. Adjustment of the brake mechanism
   17.30. Adjustment of a lay brake
   17.31. A basic brake disk
   17.32. The wheel cylinder
   17.33. Repair of the wheel cylinder
   17.34. The vacuum amplifier of brakes
   + 17.35. Antiblocking system of brakes
   17.36. Removal of air from a brake hydraulic drive
   17.37. Removal of air from a brake hydraulic drive manually
   17.38. The valve for removal of air from the block of modulators
   17.39. Electromagnetic valves of modulators
   17.40. The block of hydraulic modulators with electric motors
   17.41. The electronic block of management of braking
   17.42. The gauge of angular speed of a forward wheel
   17.43. Flexible conducting CRS of a forward wheel
   17.44. The gauge of angular speed of a back wheel
   + 17.45. Flexible conducting CRS of a back wheel
   17.46. A system electric safety lock
   17.47. Relay ABS
   17.48. Signalling devices
+ Body
+ Heating, ventilation
+ Electric equipment




17.32. The wheel cylinder
THE GENERAL DATA

The wheel cylinder

301. THE PROTECTIVE COVER
302. THE PISTON
303. CONSOLIDATION
304. РАЗЖИМНАЯ THE SPRING
305. THE VALVE CAP
306. THE VALVE FOR AIR REMOVAL
307. THE WHEEL CYLINDER

To remove or disconnect

PERFORMANCE ORDER
1. To lift and fix properly the car.
2. Back wheels.
3. To turn out the lock screw 10 тормозно го a drum.
4. A brake drum 9.
5. The top coupling spring 11. To notice position of a regulator 14, the press lever 16 and springs 15. A few to take away outside brake pad 6.
6. To clear a dirt from a surface of the wheel cylinder, the union of the pipeline, the valve for removal of air, a head of a bolt and the next details.
7. The brake pipeline from the wheel cylinder 307 (fig. the Wheel cylinder see). To muffle an aperture of the pipeline for an exception of losses of a brake liquid of hit of a dirt.
8. To turn out a bolt and to remove the wheel cylinder 307.

To establish or attach

PERFORMANCE ORDER
1. The wheel cylinder 307 on a basic disk 4 to screw a bolt. To tighten a bolt of fastening of the wheel cylinder the moment of 9 Nanometers.
2. The brake pipeline to the wheel cylinder. To tighten fastening of the pipeline by the moment of 16 Nanometers.
3. Back brake pad 6.
4. The top coupling spring 11.
The prevention

To establish a regulator 14, press the lever 16 and a spring 15 in position with which they occupied before dismantling.


5. The lock screw 10 and a brake drum 9.
6. Back wheels.
7. To remove air from all contours of a brake hydrodrive.
8. To adjust back brake mechanisms.
9. To adjust a lay brake.